R-30 Fiberglass Attic Insulation
R-30 fiberglass attic insulation is our full-depth blown-in attic insulation, priced at $1.25 per square foot of attic area. It is the right choice when an attic needs a complete upgrade or a new installation rather than a top-off.
About R-30 Fiberglass Attic Insulation
R-30 fiberglass attic insulation is our full-depth blown-in fiberglass solution for attics that need a complete upgrade or a brand-new installation. We blow fiberglass insulation to a uniform depth that achieves an R-30 thermal resistance rating across the measured attic floor. R-30 is a strong, code-relevant level of attic insulation for typical Arizona residential construction and is the right choice when your attic is under-insulated or has no insulation at all. If your existing insulation is in good condition and only needs more depth, a top-off at $0.65/sq. ft. may be more appropriate — we assess and recommend honestly.
Why it matters in Arizona
Phoenix-area summer attic temperatures routinely exceed 150°F. Without adequate insulation, that intense thermal mass radiates directly down through your ceiling drywall into your conditioned living space and overburdens your AC. R-30 fiberglass creates a substantial thermal barrier that slows that heat transfer, helping your HVAC system maintain comfortable indoor temperatures and reducing the strain on your equipment during peak summer months.
How it's priced
R-30 fiberglass is priced at $1.25 per square foot of actual attic area insulated. The instant calculator on this page gives you a base estimate from your square footage. We verify all measurements before providing a final proposal, and the final price reflects actual measured square footage, existing insulation condition, material requirements, access conditions, and any additional approved work. No surprise charges or hidden work.
What's included
- Actual measured attic square footage — not guesses
- Honest assessment of existing insulation condition
- Blown-in fiberglass installed to uniform R-30 depth
- Attic vents protected and kept clear
- Recessed light and penetration handling per fire safety
- Protected work areas and thorough cleanup
- Documentation of materials and work performed
Is this right for your home?
R-30 is right when your attic is under-insulated or has no insulation and needs a full-depth install. If your existing insulation is dry and in good condition and only needs more depth, a top-off at $0.65/sq. ft. is usually more economical. We assess your attic and recommend the option that fits — we do not push a full install when a top-off is the honest answer.
Status: Verified and Ready to Publish. Priced at $1.25/sq. ft. of actual attic area. We verify measurements before a final proposal and do not add hidden charges.
Related services
Estimate this project
Calculate your base estimate instantly — no phone call required.
Instant Insulation Price Calculator
See what your insulation project could cost — in seconds.
Step 1 — Choose Service & Square Footage
Not sure about the exact square footage? Enter your best estimate. We'll verify measurements before providing a final proposal. For wall insulation, enter the actual wall surface area — not your home's floor area.
This is an estimated base price for a qualifying standard installation. Actual measurements, material requirements, access conditions, preparation, and any additional approved work may affect the final project price.
Want us to verify your price?
Send your estimate and request a free assessment. No pressure, no obligation.
Serving metro Phoenix & surrounding Arizona
We provide r-30 fiberglass attic insulation across approved areas within metropolitan Phoenix and surrounding Arizona communities. See our service areas or call (602) 905-7474.
Frequently asked questions
What does R-30 fiberglass insulation cost?+
$1.25 per square foot of attic area insulated. Use our instant calculator for a base estimate based on your square footage. We verify all measurements before a final proposal.
What is R-30 insulation?+
R-30 is a measure of thermal resistance. In Arizona attics, R-30 fiberglass provides substantial heat-gain resistance for typical residential construction, slowing the transfer of 150°F attic heat into your living space.
How long does R-30 installation take?+
Most R-30 attic installations are completed in a single day, depending on attic size and access. We confirm timing in your itemized quote.
Can R-30 be added over existing insulation?+
If existing insulation is in good condition and dry, a top-off at $0.65/sq. ft. may be more appropriate than a full R-30 install. We assess condition before recommending.
How is attic square footage measured?+
We measure the actual attic floor area, not the home's living square footage. These can differ, especially with vaulted ceilings or conditioned attics.
Do I need to leave my house during installation?+
Usually no. Attic insulation work happens above your ceiling. We protect work areas and clean up afterward. We advise you if any specific prep is needed.
What happens around recessed lights?+
We handle recessed lights according to their fire rating and maintain required clearances. Fire safety is non-negotiable.
How are attic vents protected?+
We install insulation so that soffit and ridge vents remain unblocked, preserving the attic ventilation your home needs.
How is finished installation quality verified?+
We verify consistent depth and coverage, confirm vents remain unblocked, and document the work performed. You receive documentation of materials and results.
Does R-30 lower my electric bill?+
R-30 reduces attic heat gain, which can reduce AC workload. We do not promise specific savings percentages — we assess your attic and recommend the right R-value honestly.
