Attic Insulation

Attic insulation is our core service: blown-in fiberglass attic top-ups and installs from R-30 to R-38 that keep 150°F attic heat out of your living space. Priced from $1.25/sq. ft. for R-30 and $0.65/sq. ft. for top-offs.

$1.25 /sq. ft.Verified and Ready to Publish

About Attic Insulation

Attic insulation is our core service and the single most impactful upgrade for Arizona home comfort. We blow fiberglass insulation into your attic to a uniform depth that achieves your target R-value — from R-30 up to R-38 — creating a thermal barrier that slows the transfer of 150°F attic heat into your living space. Whether you need a full install, a top-off over existing good material, or a higher R-value, we assess your attic and recommend the right scope honestly. We do not automatically recommend more insulation for every problem — if your real issue is ductwork, we tell you.

Why it matters in Arizona

Phoenix-area summer attic temperatures routinely exceed 150°F. Without adequate insulation, that intense thermal mass radiates directly down through your ceiling drywall into your conditioned living space and overburdens your AC. Proper attic insulation is the foundation of Arizona home comfort — it slows that heat transfer, helps your HVAC system maintain comfortable indoor temperatures, and reduces strain on your equipment during peak summer months.

How it's priced

Our attic insulation is priced from $1.25/sq. ft. for R-30 and $0.65/sq. ft. for a top-off over existing good material. R-38 and R-49 are custom-quoted after an assessment. The instant calculator on this page gives you a base estimate from your square footage for our priced services. We verify all measurements and existing condition before a final proposal.

What's included

  • Actual measured attic square footage — not guesses
  • Honest assessment of existing insulation condition
  • Blown-in fiberglass to your target R-value
  • Attic vents protected and kept clear
  • Recessed light and penetration handling per fire safety
  • Protected work areas and thorough cleanup
  • Documentation of materials and work performed

Is this right for your home?

Attic insulation is right when your attic is under-insulated or needs more depth. If your existing insulation is in good condition, a top-off is usually the most economical path. If your real comfort problem is duct leakage or airflow, we identify that and recommend the right fix instead of selling insulation you don't need.

Status: Verified and Ready to Publish. R-30 at $1.25/sq. ft. and top-offs at $0.65/sq. ft. are confirmed; R-38 and R-49 are custom-quoted. We verify measurements and condition before a final proposal.

Related services

Estimate this project

Calculate your base estimate instantly — no phone call required.

Instant Insulation Price Calculator

See what your insulation project could cost — in seconds.

Step 1 — Choose Service & Square Footage

R-30 Fiberglass — 1,000 × $1.25
$1,250.00

Not sure about the exact square footage? Enter your best estimate. We'll verify measurements before providing a final proposal. For wall insulation, enter the actual wall surface area — not your home's floor area.

Your Estimated Base Price
$1,250.00

This is an estimated base price for a qualifying standard installation. Actual measurements, material requirements, access conditions, preparation, and any additional approved work may affect the final project price.

Want us to verify your price?

Send your estimate and request a free assessment. No pressure, no obligation.

Serving metro Phoenix & surrounding Arizona

We provide attic insulation across approved areas within metropolitan Phoenix and surrounding Arizona communities. See our service areas or call (602) 905-7474.

Frequently asked questions

Why is attic insulation so critical in Phoenix?+

Phoenix summer attic temperatures routinely exceed 150°F. Without adequate insulation, that intense thermal mass radiates directly down through your ceiling drywall into your conditioned living space, overburdening your AC.

How thick should attic insulation be for an R-38 rating?+

For blown-in fiberglass, R-38 typically requires about 13 to 14 inches of uniform coverage. We measure depth across multiple points to ensure full consistency.

Can you top up my existing attic insulation?+

Yes. If your existing attic insulation is dry, clean, and free of contamination, a top-off at $0.65/sq. ft. is often the most economical way to restore performance.

What does attic insulation cost in Phoenix?+

R-30 fiberglass is $1.25/sq. ft. and a top-off is $0.65/sq. ft. R-38 and R-49 are custom-quoted. Use our instant calculator for a base estimate.

Is my hot room an insulation problem or an HVAC problem?+

It could be either. We assess insulation, air leakage, and ductwork together. If the real issue is leaking ducts, we tell you — we don't sell insulation you don't need.

How long does attic insulation installation take?+

Most residential attic installations are completed in a single day. Larger projects or those requiring removal may take longer; we confirm timing in your itemized quote.

Do I need to leave my house during installation?+

Usually no. Attic insulation work happens above your ceiling. We protect work areas and clean up afterward.

How do you measure attic square footage?+

We measure the actual attic floor area, not the home's living square footage. These can differ, especially with vaulted ceilings or conditioned attics.

Does all existing insulation need removal?+

No. If existing insulation is in good condition and dry, a top-off is often the right call. Removal is recommended for damage, contamination, or when access to the attic floor is required.

How is finished installation quality verified?+

We verify consistent depth and coverage, confirm attic vents remain unblocked, and document the work performed. You receive documentation of materials and results.

Call SapperCalculate My Price